How to use the microphone in kc 2

15 November 2023, 19:30

Microphone in online games is an integral part of gameplay, so it is important to know how to enable microphone in kc 2. In most team games, players' voice interaction determines the result of the match.

However, some people do not know how to properly set up and use a microphone, so they cannot make the maximum impact for their team.

Article Navigation

Why use a microphone

The benefits of using a microphone are many. Talking by voice is much more convenient than in the chat, because you do not need time to write a text, it unties your hands and allows you to talk during the match without problems.

You can transmit important information about the location of opponents, their weapons and purchases. Turn on the microphone in kc 2 not only for information on the game, but also remote conversations with teammates, different jokes and communication allows you to morally not get tired during long games and perhaps even find new acquaintances.

How to connect the microphone to the device

The

first thing to

do

is to configure the microphone at the operating system level, because in kc 2, for example, you can

not

select the input device or adjust its parameters.

The

first step is to connect the microphone.

There are two types of microphones:

  • Studio - excellent sound quality, but it requires a special audio interface, which is purchased separately. Careful customization is possible. It costs quite a lot.

  • Ordinary - its cost is less than the studio one, but the sound quality is also less. If you are not a streamer on kc, or have a small budget, then choose it.

How to connect the microphone through the wire

How to use the microphone in kc 2

To turn on the microphone in kc 2 first you need to connect this very microphone to the sound card of a computer or laptop. Laptops most often have a combination jack where you can connect both headphones and a microphone. 

On computers with a system unit, combined inputs are sometimes found, but most often one separate one is responsible for connecting the microphone and the other for the output device. The microphone jack is signed and highlighted in pink or red. Insert the plug into it and then install the drivers from the official website of the seller of the microphone.

How to connect the microphone wirelessly

To connect the microphone in kc 2 can be used and Bluetooth. First, you need to make sure your computer and microphone support this feature. There is usually a button or switch on the input device, read the instructions. Computers and laptops don't always have a bluetooth transmitter, in which case you can buy a cheap adapter and connect it to your PC:

How to use the microphone in kc 2 2

  • Go on your computer to “Settings”.

  • Find the button “Devices”.

  • Enable bluetooth and add the connection to your microphone. The name of the micro can be found on the box or in the manual.

How to configure the microphone in the OS

You have connected the microphone for kc 2, now it remains to configure it at the level of the operating system and in the game itself. To make sure that the microphone works and to be able to customize it, do the following:

  • Go to “Settings”, then ”System”.

  • In the “Sound” subsection, look for the input device and set the desired one. Select the name of your microphone, because sometimes the PC defaults to a sound card or other input devices instead of a microphone.

  • If the slider “Checking the microphone” changes, it means that the microphone is working properly. The higher the level, the louder it is.

  • Open “Device properties”.

  • Here you can change the microphone volume level and other settings.

How to use the microphone in kc 2 3

If you are sure you have selected the correct input device, but it does not work, go through the troubleshooting procedure and follow the instructions to fix it.

The

layout of buttons and settings differs, depending on the operating system version and manufacturer

.

If you can not find the necessary section, then find a guide on the Internet.

How to configure the microphone in Counter-Strike 2

If you are sure that the sound card is working, then it's time to connect the microphone in kc 2 and customize it. Go to the game and open the settings section, then go to the tab “Sound”.

Check if you have “activation of the microphone through the key”, otherwise the microphone will always work and distract your teammates with interference or extraneous noise. Voice chat volume is responsible for hearing your teammates, adjust the slider depending on the volume of your headphones.

Switch “player speech positioning” increases or decreases the volume of your teammate, depending on their positioning. It sounds interesting, but in reality it only interferes and does not allow you to concentrate on the game.

How to use the microphone in kc 2 4

In the subsection “Keyboard and mouse” you can set the microphone activation button. If possible, it's better to use the side buttons on your mouse or the convenient but unused keys on your keyboard. It will not be very comfortable to reach out to the other end of the keyboard during an active game in order to enable the microphone in kc 2.

Console commands for the

microphone

Customizing the microphone does not end with its connection to the sound card and turning it on in the game itself, there are many other aspects, such as console commands. Make sure the developer console is enabled and you can open it

  • voice_loopback 1 - are you questioning whether your microphone is working, or do you want to hear yourself from your teammates? Then enter this command and you will hear yourself. It makes it convenient to customize your micro.

  • voice_scale *number* - allowable values range from 0.001 to 0.99. This command is responsible for the volume of all surrounding players on the server in voice chat.

  • snd_restart - if you have entered the server and there is distracting music playing, use this console command, it will allow you to get rid of it.

  • voice_fadeouttime *number* - allowable values range from 0.001 to 0.999. Responsible for fading out your voice when using voice chat.

What to do if the microphone doesn't work

If you have enabled the microphone in kc 2, but it doesn't work only in-game, try reinstalling it. If the microphone does not work at the operating system level, the situation is much more complicated.

The first thing to check is that the wires are connected correctly. The wire from the microphone must go either into a separate pink-colored connector labeled “mic”, or into a special combination connector. Check the integrity of the microphone and its wires.

Enable troubleshooting in the microphone settings. If this doesn't help, take the microphone under warranty to a store or craftsman who will find out what's wrong and return the input device to working order.

Please note that studio microphones can't work without additional equipment. Sometimes it only needs an audio interface, but, for example, XLR micro requires a preamplifier and converter for its operation, without which sound transmission is impossible.

If you are not ready to spend on equipment, then consult the seller and find out the type of microphone you are going to buy

.
1
153
Комментарии (0)
Никто не оставлял комментариев. Оставьте первым!
Написать комментарий
Оставить
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image
Flake image